Courtesy of Dan Palm.
Build your own WEGC Target Frame for less than $10
Here are the dimensions and materials needed to build your own target frame for the Main Range. The space between the two steel target frame holders is 22 ½ inches (interior edge to interior edge) exactly, so your two side pieces will need that distance in between.
- · Two 4-foot sections of 5/8” x 1 3/8” pine for the sides.
- · Two 25 ½ inch sections of 5/8” x 1 3/8” pine for the crosspieces.
- · Four 2-inch long x 3/8 inch bolts w/ wing nuts and washers
- · One piece of scrap cardboard and staple gun
Cut the four pieces of pine to length, as above. Mark and drill holes so that the space between the two pine sides is 22 ½ inches exactly. Cut cardboard to fit and mount on the wood frame using staple gun.
Note: Again, target frame dimensions for the Juniors Range are different.